TLG a;uminium alloy type is the only solution to the larger size chains.The supporting boards can be made according to the requirements of the users.Thanks to the strong construction, the width of the supporting board can be 1200mm.
TLG plastic spacing straps can moved and adjusted in position freely.
If cables in many different specifications,you may select this economic device.
TLG foam supporting board has many advantages such as cables be protected in a most appropriate way and suitable for the condition of hightraval speed.Many famous car makers have chosen this type of device.All cable are distributed in the center position of the fibres.
TLG type aluminium alloy protecting board is of completely enclosed type.
TLG type drag chains are newly developed “Sliver Star Protecting Board”,which are made by using aluminium alloy .Various types of it are available for selection.The order number are TLG10、TLG20、TLG30、TLG40、TLG50.
TLG type steel chains with stainless steel straps
Elastic steel straps can be installed intermally or externally with the aim to protect the cables and keep clean inside.It is very safe and reliable.
TL series steel drag chains
TL series drag chains are mainly consisting of chain plate (top quality stainless steel with chromium plated),supporing board (extruded aluminium alloy)and pinshaft(alloy),etc.There is no relative motions between the cables/rubber hoses and the drag chains,giving no deforming or twists.The chromium plated chain board has very nice-looking appearance and has very rational consruction and flexible and high strength.It is reliable and easy to operate,install,dismantal or assemble .It is worthwhile mentioning that the anti-wearing performance has been improved greatly due to wear resistant material and alloy pinshaft are used.The product is flexible to bending and has low resistance,giving low noises.It can be used for a very long period of time without any deformation or hanging down.
The product is nice-looking,which makes the machine tool unit nicer looking as a whole and makes the machine tools and machineries more competitive in the international market.
1. The drag chain can adapt to max.moving speed of 40m/sec.
2. When at the max moving speed,the sound pressure of moises shall not be greater than 68db.
3. The service life of the drag chain shall not be less than 1million times(reciprocating).
Main parameters&dimensions for TLG type steel drag chains
|
Type
|
Bending
radius(mm)
|
Pitch
|
Inside highth
|
Outside highth
|
When non-support wheel is allowed
|
Weight 100mm
|
|
Length(m)
|
Load(kg/m)
|
|
TLG20
|
75/100/150/200/250/300
|
75
|
30
|
50
|
3/2/2
|
20/30/30
|
4.90/4.80/5.50
|
|
TLG30
|
115/150/200/250/300/400
|
100
|
45
|
75
|
4/3/3
|
25/40/40
|
9.10/9.10/10.00
|
|
TLG40
|
185/200/250/300/400/500
|
125
|
66
|
100
|
6/4/4
|
30/50/50
|
18.10/18.10/19.30
|
|
TLG50
|
250/300/400/500/600
|
175
|
100
|
150
|
10/8
|
10/30
|
25.00
|
|
TLG50
|
250/300/400/500/600
|
180
|
118
|
150
|
10/8
|
10/30
|
25.00
|
